Menu
- Home
- About
- Services
- Service Areas
- Contact
close
Auto detailing at Invisible Touch Inc. goes beyond a standard car wash — it is a systematic, hand-performed restoration of your vehicle’s exterior and interior surfaces using professional-grade products and techniques. We serve Bedford, M, and the surrounding greater Boston metro area.
200+ Happy Customers
in Bedford, MA
Auto detailing is the comprehensive cleaning, decontamination, and restoration of a vehicle’s exterior and interior surfaces — performed by hand using professional products calibrated to each surface type. Unlike a car wash, which cleans the surface with mechanical agitation and general-purpose soap, detailing addresses each surface individually: paint, glass, trim, leather, fabric, plastic, and metal each require different chemistry and technique.
A professional exterior detail removes bonded surface contamination that washing leaves behind — iron particles, industrial fallout, tree sap, and road film embedded in the clear coat. This contamination is invisible to the eye in normal lighting but creates a rough, dull surface texture that causes paint to look flat rather than reflective.
Vehicles in Bedford and the surrounding greater Boston metro area accumulate road salt, pollen, industrial fallout, and commuting grime that bonds to paint and interior surfaces over time. Professional detailing on a seasonal cycle removes this accumulated contamination before it causes permanent surface degradation.
Auto detailing cleans and prepares the surface, but it does not remove swirl marks, scratches, or paint defects - those require paint correction. Detailing is the first stage of surface preparation; correction is the second stage for vehicles that need optical clarity restored before ceramic coating or PPF installation.
Surface defects in the clear coat require paint correction — a machine polishing process that physically levels the clear coat to remove imperfections. Detailing cleans the surface; correction restores it.
Surface defects in the clear coat require paint correction — a machine polishing process that physically levels the clear coat to remove imperfections. Detailing cleans the surface; correction restores it.
Damage that penetrates through the clear coat into the base coat or primer requires collision repair or spot painting, not detailing.
Buffer trails, holograms, and uneven polishing from amateur correction attempts require professional paint correction to resolve. Detailing cannot mask or fix these defects.
A thorough exterior-only service focused on paint decontamination, safe hand washing, and surface protection.
Ideal for: Daily drivers needing regular maintenance, vehicles with seasonal contamination buildup (post-winter salt, spring pollen), pre-sale exterior preparation, and vehicles receiving paint correction or ceramic coating at a future visit.
Starting from: $200–$350 (sedan/compact)
A comprehensive interior service that restores the cabin to a clean, conditioned, well-presented state.
Ideal for: Vehicles with daily-use cabin wear, pet owners, families with child seats and frequent spills, pre-sale interior refresh, smoker vehicle remediation, and vehicles with accumulated interior contamination that regular cleaning cannot address.
Starting from: $175–$300 (sedan/compact)
The complete service combines exterior decontamination and interior restoration in a single appointment. Includes all items from both packages above, plus additional refinements.
Ideal for: Vehicles that need full restoration, seasonal transitions (winter-to-spring cleanup), vehicles preparing for paint correction and ceramic coating, pre-sale preparation where both interior and exterior condition affect value, and vehicles not yet ready for long-term protection but needing comprehensive maintenance.
Starting from: $350–$550 (sedan/compact)
All pricing varies by vehicle size, condition, and specific service needs. SUVs, trucks, and large vehicles are quoted individually. Contact us for an exact estimate.
Ceramic coating Ceramic coating bonds permanently to whatever surface condition exists at the time of application. If the paint surface carries embedded contamination, water spots, or minor defects when the coating is applied, those imperfections are sealed in for the life of the coating.
Professional detailing is the first stage of paint preparation before any long-term protection product. A thorough decontamination removes the embedded material that car washes leave behind. For vehicles with visible swirl marks or surface defects, paint correction follows detailing to restore optical clarity before the coating locks in the result.
At Invisible Touch Inc., we perform detailing and paint correction in-house as part of a continuous preparation sequence. Your vehicle does not leave the shop between stages, which eliminates re-contamination between appointments and ensures the coating bonds to the cleanest possible surface.
We examine your vehicle under controlled lighting to identify contamination levels, paint condition, interior staining, and any areas requiring special attention. This assessment determines whether your vehicle needs a standard detail or additional preparation for coating.
We pre-rinse to remove loose debris, then apply iron decontamination and clay bar treatment to the exterior. These steps remove bonded contamination that a standard wash cannot address - the surface should feel glass-smooth before any polishing or protection is applied.
Two-bucket hand washes with pH-neutral, paint-safe soap. No automated brushes, no friction-based equipment. Each panel is washed individually to prevent cross-contamination between sections.
All interior surfaces are vacuumed, cleaned, and conditioned with products matched to each material type. Leather, vinyl, fabric, plastic, and glass each receive appropriate treatment. Compressed air is used for vents and crevices where a vacuum cannot reach.
After completing all surfaces, we perform a final walkthrough under inspection lighting. Exterior paint receives a spray sealant for short-term protection. You receive a condition report noting any areas where additional services (paint correction, coating, or interior repair) would provide further benefit.
Auto detailing at Invisible Touch Inc. starts at $175–$200 for a single-service detail (interior or exterior) and $350–$550 for a full detail on a sedan or compact vehicle. Pricing varies by vehicle size, condition, and the level of contamination or staining present. SUVs, trucks, and heavily soiled vehicles are quoted after inspection. We provide a written estimate before beginning any work.
An exterior or interior detail takes 3–5 hours, depending on vehicle size and condition. A full detail combining both services takes 5–8 hours and is typically completed in a single day. Heavily contaminated vehicles or those requiring additional decontamination steps may extend the timeline. We do not rush the process - each surface receives the attention it requires.
Auto detailing is a hand-performed restoration process that addresses each surface individually with surface-specific products and techniques. A car wash uses mechanical agitation and general-purpose soap to remove surface-level dirt. Detailing removes bonded contamination (iron particles, industrial fallout, tree sap) that washing cannot reach, conditions materials to prevent degradation, and restores surfaces to a like-new state. A car wash cleans the surface. Detailing restores it.
Yes - professional detailing is a required preparation step before ceramic coating application. Ceramic coating bonds permanently to the paint surface, sealing in whatever condition exists at the time of application. Without proper decontamination and surface preparation, contaminants and defects become permanent under the coating. At Invisible Touch Inc., detailing and paint correction are performed in-house as a continuous preparation sequence before coating.
Most vehicles benefit from a professional detail every 4–6 months, or seasonally. Vehicles with ceramic coating require detailing less frequently because the coating prevents contamination from bonding to the surface — a maintenance wash every 2–4 weeks and a professional detail every 6–12 months is typically sufficient for coated vehicles. Uncoated vehicles in the Bedford area should be detailed at a minimum after winter salt season and before summer.
Contact Invisible Touch Inc. to book an auto detailing appointment. We inspect your vehicle, recommend the right detail package, and provide a written estimate before beginning any work.